Description

Original knife for Moulinex meat grinder | SS-1530000134

The original Moulinex meat grinder knife is the main cutting component responsible for grinding meat.
When the knife becomes dull, the meat is crushed instead of cut, and the quality of the grind decreases significantly.
Replacing the original blade restores the grinder to full performance in minutes.

Moulinex cutting technology

The original Moulinex knife was designed with maximum precision to fit the unique structure of the ME and NE series meat grinders.
Thanks to the four beveled blades, the knife performs a clean and efficient cut of the meat fibers.
In addition, the square hole in the center ensures a perfect fit with the spiral axis, so the knife rotates stably without vibration.
Click the “Check Model Compatibility” button at the top of the page to verify compatibility before ordering.

What happens when the knife becomes dull?

When the knife is not sharp enough, there are several clear signs. First, the ground meat comes out crumbly and uneven.
Second, the wires and tendons are wrapped around the axis instead of being cut.
Also, the grinder works harder, heats up, and makes an unusual noise.
In extreme cases, the additional load on the motor may shorten the life of the device.

✅ Why only an original knife?

The original Moulinex knife is made of high-quality stainless steel, so it is resistant to rust and corrosion.
Furthermore, the sharpening angle of the blades has been precisely designed to match the original grinding networks.
Using a non-original knife may cause a gap between the knife and the mesh, resulting in the meat not being ground properly.
An original part ensures the integrity of the device and the quality of the result for years.

You will find the model number of the meat grinder on a sticker under the base of the device or on the back.
The model number is essential to verify part compatibility before ordering.

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the model number on the sticker):

• ME110130
• ME112832
• ME306832
• ME307832
• ME308827
• NE113135
• NE114130

⚠️ The knife is also suitable for Tefal (Tefal) meat grinders from the same series, as both brands belong to the SEB group.

🔧 Installation instructions

⚠️ Disconnect the device from the power supply before replacing.

1. Loosen the clamping nut by turning it counterclockwise.
2. Remove the mesh and old blade from the spiralizer shaft.
3. Mount the new knife on the spiral shaft so that the sharp (sharpened) side faces the mesh.
4. Put the net back in place.
5. Tighten the clamping nut by turning it clockwise.

Estimated time: only 2 minutes.

💡 Important tip: Make sure the knife sits flat and completely on the spiral axis. If the knife is assembled upside down, the grinder will push the meat instead of grinding it.

💡 Tip from the experts

To extend the life of your knife, wipe it immediately after washing to prevent moisture buildup.
In our experience at official service laboratories, a knife that is thoroughly dried after each use lasts longer.
Additionally, avoid grinding bones or frozen meat, as these dull the blades quickly.

❓ Frequently Asked Questions

How do you know if the knife in the meat grinder is dull?

The main signs are meat that comes out crushed and uneven, tendons and wires that are wrapped around the axis, and overheating of the device.
Also, if the grinder is making a louder noise than usual or is pushing the meat out instead of grinding it,
This is a clear sign that the knife requires replacement.

Can the knife be sharpened instead of replaced?

Yes, a meat grinder knife can be sharpened on fine sandpaper or a whetstone.
However, the process requires great precision to maintain the flatness of the blades.
After several sharpenings, the knife becomes dull and needs to be replaced. In our experience, a new, original knife gives better results and lasts a long time.

What is the difference between an original knife and an unapproved replacement?

An original Moulinex knife is made of high-quality stainless steel with precise sharpening that matches the original blades.
Unapproved replacements may be made of softer metal that hardens quickly,
Or have inaccurate dimensions that create a gap between the knife and the mesh and impair the quality of the grind.

Do I need to replace the mesh along with the knife?

Not necessarily, but it is recommended to check the condition of the mesh. If the mesh is worn or the holes in it have widened, it is best to replace both parts together.
The knife and the mesh work closely together, so a new part against a worn part may affect the result.
If the mesh is in good condition, it is sufficient to replace only the knife.

How do you clean and store the knife?

Wash the knife in hot water with dish soap immediately after use, and wipe it thoroughly until it is completely dry.
Store it in a dry place, preferably inside the grinder's storage compartment or wrapped in a soft cloth.
Avoid storing in a drawer with other utensils that may scratch the blades.

⏱️ Delivery times:

• Most localities: within 10 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 10 business days