Description

Original glass lid for Delonghi integrated oven | 0326N2972

The top glass lid is a critical part of DeLonghi integrated hobs.
It protects the cooking surface between uses, prevents dirt from the gas burners, and allows safe use of the stove.
Replacing with a genuine part ensures precise fit and proper function for years.

Is the glass lid cracked or broken? It's time to replace it.

A cracked or broken glass stovetop lid is not just an aesthetic issue.
When the lid is damaged, it exposes the cooktop to oil splashes and re-heating, which accelerates wear and tear on the gas components underneath.
Furthermore, a broken lid may cause cuts and compromise the integrity of the device and its safety of use.

⚠️ It is important: Do not continue to use a cracked or broken lid. Tempered glass that has cracked may suddenly shatter into small pieces.
Stop using the lid immediately upon discovering the crack and replace it as soon as possible.

Common reasons for lid breakage:

✅ Placing hot cookware directly on the cold glass
✅ Lid that closes forcefully when the gas heads are not positioned correctly
✅ A lid that has been damaged by a sharp blow or the fall of a heavy cookware.

Why is it important to replace with an original DeLonghi lid?

The original DeLonghi glass lid is made of tempered glass that is resistant to sharp temperature changes.
Due to this, it allows safe use in close proximity to the gas flame.
A non-genuine part, on the other hand, is made of glass that does not meet the original specifications, which increases the risk of further cracks and damage to the burners.

Also, the original lid is precisely sized to fit the hob hinges on the DCS and NDS models.
Due to this, it closes and opens smoothly without putting pressure on the stove frame.

⚠️ Before ordering, check the exact compatibility with your model using the “Check Model Compatibility” button at the top of the page.

How to find the model number of your oven

The model number can be found on the inside door frame of the oven, when the door is fully open. The model number is essential for verifying lid compatibility before ordering.

📋 Technical specifications

✅ Compatible models

The part fits the following models. Make sure it matches the model number on the inner door frame:

• DCS12EDW
• DCS32EDW-IL
• DCS67EDW-IL
• NDS-1217AN
• NDS-1332W
• NDS-1357W
• NDS-378W

To check exact compatibility for your model, click the “Check Model Compatibility” button at the top of the page.

Installation instructions

⚠️ Disconnect the stove from the electricity before replacing.
⚠️ Make sure the stove is completely cold before reaching for the lid.
⚠️ If the lid is broken: Wear thick gloves before touching the fragments. Carefully pick up the fragments with a broom and dustpan, not by hand.
Tempered glass fragments are extremely small and can cause deep cuts.

1. Open the glass lid completely until it stops.
2. Carefully lift the lid from its hinges, holding it with both hands.
3. Place the new lid on the hinges in the same direction.
4. Gently lower the lid and check that it closes and opens smoothly.

Estimated time: 5 minutes. No additional tools required.

💡 Tip from the experts

To extend the life of the glass lid, avoid closing it when the stove is still hot.
Wait at least 10 minutes after turning off the gas before removing the lid.
Also, clean the glass with a damp cloth only, without abrasive materials that may create micro-cracks.

❓ Frequently Asked Questions

Why did a glass oven lid suddenly break?

A glass stovetop lid is made of tempered glass that is heat-resistant, but a sudden temperature change is the most common cause of breakage.
When you place a cold utensil on hot glass, or close the lid immediately after cooking, internal pressures are created that lead to cracks.
A typical fracture develops from a microcrack that has accumulated over time.

Can a glass lid for a Delonghi oven be purchased separately?

Yes. The original glass lid for DeLonghi ovens is available for purchase as a standalone replacement part.
It is important to purchase the original part according to the exact part number for your model, as the lid dimensions differ between the different DCS and NDS series.

How do you replace a glass lid on a Delonghi stove?

Replacement is simple and requires no tools. First, open the lid completely. Then, lift it straight up from the hinges with both hands.
Install the new lid on the hinges and check that it moves smoothly. Total replacement time is approximately 5 minutes.

How to clean a glass stove lid?

Clean the glass lid only after it has cooled completely. Use a damp cloth with a little dishwashing liquid.
Avoid metal scrapers or abrasive cleaners, as they create microcracks in the glass and weaken it over time.

What is the difference between an original glass lid and an unapproved replacement?

The original lid is made of tempered glass that meets the manufacturer's standard for heat and pressure. In addition, its dimensions are accurate to the specific axis of your model.
An unapproved replacement may not meet the required heat standards and may cause damage to the gas burners and compromise the integrity of the appliance.

⏱️ Delivery times:

• Most localities: within 10 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 10 business days