Description

Original right rail for Grundig Bloomberg 4-door refrigerator drawer | 5914000400

Original telescopic rail for the right side of the cooler or vegetable drawer in 4-door refrigerators from Grundig and Blomberg.
The part returns smooth movement to the drawer and allows for comfortable opening and closing like on the first day.

⚠️ Just before ordering – only original part!

To ensure a perfect fit and smooth movement of the drawer, It is important to use only original rail..
Non-genuine rails can cause noise, unstable installation, and rapid wear.
Click the 'Check Model Compatibility' button at the top of the page. To make sure the part fits your refrigerator.

When should the drawer rail in the refrigerator be replaced?

From our experience at the official service laboratories, customers contact us when they encounter one of the following phenomena:

✅ The drawer is stuck. – Does not open or close easily
✅ Noises when opening or closing – Creaking, grinding, or grinding sounds
✅ The drawer does not go all the way in. – A small gap remains that prevents hermetic closure
✅ Uneven movement – The drawer “jumps” or moves unevenly
✅ Visible fracture in the rail – Crack, fracture or deformation in plastic or metal
✅ The drawer falls or comes loose. – You don't stay steady on the rails

Why do the rails in the refrigerator break?

The cooler and vegetable drawers in Bloomberg and Grundig refrigerators Moving on telescopic rails Which allow for full and comfortable opening.
Over time and after intensive daily use, the rails may wear out for several reasons:

• Overload on the drawer – Excessive filling of vegetables, fruits or heavy bottles
• Forced opening and closing – Strong pushes that damage the sliding mechanism
• Dirt and food residue – Penetration into the track that impedes traffic
• Natural wear and tear – Wear of the rollers and internal mechanism over the years

Why original track?

Non-original rails can cause additional problems:

⚠️ Inaccurate match – Gaps that cause vibrations and noise
⚠️ Inferior plastic material – Rapid breakage and instability
⚠️ Accelerated wear – Need for repeated replacement within a short time
⚠️ Damage to the drawer itself – Abrasions and scratches on the plastic

The original track from Grundig/Bloomberg Made from high-quality materials and designed precisely for the dimensions and mechanism of your refrigerator,
and ensures smooth and quiet movement for years.

How do you replace the track yourself? 🔧

Replacing a drawer rail is a simple operation that most users can perform themselves without special tools:

Step 1: Open the drawer and remove it completely from the refrigerator.

Step 2: Release the old rail – usually by pressing a locking tab or removing one screw

Step 3: Insert the new rail into place and make sure it clicks into place.

Step 4: Return the drawer to the rails and check that it moves smoothly.

⏱️ Estimated installation time: about 5-10 minutes

Where is the model number sticker on the refrigerator?

To locate the model number of your refrigerator, Open the refrigerator door and check the inner frame.
Usually on the right or left side of the door. The sticker includes the model number and serial number.

💡 Expert tip – Preventive maintenance for rails

To extend the life of the rails and prevent malfunctions:

• Clean the rails. Once a month with a damp cloth to remove dirt and residue
• Don't overload. The drawer – distribute the weight evenly
• Open and close gently. – Avoid strong pushes
• Check occasionally. There are no objects that have fallen behind the drawer and are interfering with movement.

Customers who purchased this part praised the ease of installation and the return of the drawer to smooth functioning immediately after replacement.

Technical

Model compatibility

The rail is suitable for 4-door refrigerators of the following models:

FAQ

❓ Is the track suitable for my model?

The rail is suitable for a wide range of 4-door refrigerators from Grundig and Blomberg.
Click the Compatibility Check button at the top of the page. For immediate approval.

❓ Can I replace the rail myself?

Yes! This is it. A simple replacement that you can do yourself In about 5-10 minutes. No special tools or technician required.
Simply remove the drawer, loosen the old rail, insert the new one, and put the drawer back in place.

❓ I also have a problem with the left rail – do I need to order two rails?

This rail is intended for Right side onlyIf the left rail is also damaged, the corresponding rail for the left side must be ordered separately.
It is recommended to check both rails and replace them together if there are signs of wear.

❓ Is this an original product?

Yes. This is a genuine Grundig/Blomberg replacement part (Sliding Drawer Rail) manufactured to the manufacturer's strict standards.

❓ How long will it take for me to receive the shipment?

Deliveries are made within Up to 10 business days For most of the country. For the Golan Heights, the Arava, and Eilat – up to 10 business days.