Description

Original refrigerator door seal for Blomberg 4-door refrigerator | SKU 4362161600

The original Blomberg Fresh Food Door Gasket is designed for KQD series 4-door refrigerators.
The part creates a perfect seal between the door and the refrigerator body, preventing cold air from escaping and maintaining optimal energy efficiency.
It is recommended that the part be installed by a qualified official service technician. To ensure optimal performance and maintain warranty.

⚠️ Important: Professional installation

This product requires installation by a certified official service technician.
Replacing a door seal on a 4-door refrigerator requires professional knowledge, appropriate tools, and an understanding of the door structure and rails.
Incorrect installation may cause poor sealing, energy waste, and damage to the refrigerator.

🔧 Click here to schedule a certified official service technician

💰 Cost of technician visit: 290 ₪

The part can also be installed independently or by a private technician, but we strongly recommend using an official service technician to maintain the warranty and ensure professional installation.

🛡️ Just before ordering – safety above all!

To ensure a successful repair and maintain the longevity of the refrigerator, It is mandatory to use only original gasket..
Non-original seals may cause poor sealing, increased electricity consumption, ice buildup, and even void the warranty on the device.

Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the gasket is suitable for your refrigerator.

What's the problem? Signs of a faulty door seal

From our experience at official service laboratories, these are the common signs of a door seal requiring replacement:

• 🌡️ The refrigerator is not cooling properly. – Hot air penetrates inside and affects the internal temperature
• ❄️ Ice or frost accumulation – A clear sign of air leakage through the gasket
• 💧 Water droplets or moisture – Condensation is formed as a result of temperature differences
• 🔊 The refrigerator works non-stop – The compressor struggles to compensate for the loss of cold.
• 💡 High electricity bill – The refrigerator consumes more energy due to poor sealing
• 👀 The gasket is cracked, hard or deformed – Visible physical damage

A simple test at home: Close the refrigerator door on a bill. If the bill is easily removed without resistance, the gasket needs to be replaced.

Why only an original Blomberg gasket?

Our certified technicians state that a genuine Bloomberg gasket is preferable for these reasons:

✅ perfect match – Manufactured to the exact dimensions of KQD refrigerator doors
✅ Fine magnetic stripe – Creates a hermetic seal and prevents air leakage
✅ Flexible and durable PVC material – Maintains flexibility for years even at low temperatures
✅ Resistance to mold and bacteria – Prevents the development of odors and contaminants
✅ Maintaining responsibility – Using an original part does not affect the manufacturer's warranty.

⚠️ Non-original parts may have inaccurate dimensions, a weak magnetic strip, and materials that harden and crack quickly.

About the product

This seal fits the door. Top refrigerator compartment (Fresh Food Compartment) In Blomberg refrigerators with 4 doors.
The magnetic seal creates a tight connection between the door and the refrigerator body, ensuring that cold air stays in and warm air stays out.

Blomberg technologies combined with the gasket:

• Dual Cooling – Dual cooling system for uniform temperature distribution
• BioCC System – Biological preservation system for efficient air distribution
• HygAir – Technology to neutralize bacteria and odors

📍 Where do you find the model number?

In Blomberg 4-door refrigerators, The model sticker is usually located on the inside left side of the refrigerator compartment., on the inner wall.
You may need to move a shelf or drawer to see it clearly.

The sticker includes the model number, serial number, and other information about the device.

🔧 Professional installation – why is it important?

From our experience at the official service , replacing a door seal on a 4-door refrigerator is an operation that requires expertise:

1. Precise disassembly – Remove the old seal carefully without damaging the retaining strip or the door panel.
2. Thorough cleaning – The channel where the seal sits must be completely clean.
3. Preparing the new gasket – Wash the gasket in hot water or heat it in a fan to restore flexibility.
4. Gradual installation – Corner-to-corner installation with uniform pressure
5. Door calibration – Sometimes it is necessary to calibrate the door hinges after installation.

🔧 To schedule a certified official service technician – click here

Technical

Compatible models

Important: Before ordering, ensure compatibility with your refrigerator model using the 'Check Model Compatibility' button at the top of the page.

Expert Tip: Preventive Maintenance for Door Seals

To extend gasket life and prevent premature replacement:

🧽 Monthly cleaning – Wipe the gasket with a damp cloth with a little neutral soap.
🚫 Avoid spicy foods. – Do not use bleach or aggressive cleaning agents.
✨ Light lubrication – A thin application of Vaseline or glycerin on the gasket maintains its flexibility.
(I.e. Don't hang on the door. – Excess weight damages the hinges and seals
👀 Periodic inspection – Check the condition of the gasket and the level of sealing once a month.

🛒 Ready to order?

Before ordering:

1. Check compatibility with your refrigerator model using the button above.
2. Arrange for a qualified technician to install. – Cost of visit 290 NIS
3. Order the original part

Customers who purchased this part have praised the improved sealing quality and the savings in electricity consumption after professional installation.

Frequently Asked Questions (FAQ)

❓ Does the gasket fit my model?

Click the 'Check Model Compatibility' button at the top of the page. Enter the model number from the sticker inside the refrigerator and the system will immediately confirm compatibility.

❓ Is this an original product?

Yes. This is a genuine Blomberg door seal, manufactured to the highest standards and comes with a full warranty.

❓ Can I replace the gasket myself?

The part can be installed independently or by a private technician.
Yet, We strongly recommend installation by a qualified official service technician.
To ensure proper installation, warranty maintenance, and optimal performance.
To schedule a technician, click here..

❓ How much does a technician visit cost?

The cost of a visit by an official service technician is 290.
The technician will install the seal professionally and ensure that the door closes and seals properly.

❓ How often should the gasket be replaced?

Under normal conditions of use and proper maintenance, a quality gasket will last between 5-10 years.
It is recommended to check the gasket every few months and replace it at the first signs of wear.

❓ Does the replacement affect the warranty?

Using an original part and installing it by a certified technician from the official service maintains the warranty.
Non-original parts or unprofessional installation may void the warranty.

🔧 To schedule a certified official service technician – click here