Description

Original red bowl handle for Magimix food processor | 105591S

The original Magimix red bowl handle, part number 105591S, is designed for the bowl of Cuisine Systeme 4200XL, 4200 and 4150 food processors.
The handle is made of durable ABS plastic and allows for a safe and stable grip during all stages of preparation.
Replacing with an original part ensures an exact fit and the device's integrity for years to come.

Is the handle broken? It's time to replace it.

Is the handle broken or cracked? Does the bowl slip out of your hand when lifted? A damaged handle jeopardizes the preparation results and the safety of working with the bowl.
Due to the unique handle structure of the 4200XL bowl, a non-genuine part often does not fit exactly into the bowl's connection channel.
As a result, the handle may become loose even after replacement. Click the “Check Model Compatibility” button at the top of the page for a quick verification before ordering.

✅ Using an original Magimix handle ensures a stable grip, precise connection to the bowl channel, and resistance to working temperatures.

⚠️ Using a non-original part may damage the integrity of the device and cause instability during use.

What causes a handle to become damaged?

The handle is made of high-quality ABS plastic, but over time it may be damaged by dropping the bowl on a hard surface.
Excessive friction with the rim of the sink when rinsing, or using excessive force when lifting the bowl when it is full.
A small crack at the base of the handle expands over time and can cause complete breakage during operation.

From the experience of the official service's certified technicians, a handle that is cracked at its base causes an unstable grip even when the bowl appears to be in good condition.
Therefore, it is recommended to replace the handle as soon as the first crack appears.

The model number of your food processor can be found on the metal plate on the bottom of the appliance. The model number is essential for verifying handle compatibility before ordering.

📋 Technical specifications

✅ Compatible models

The handle is suitable for the following Magimix Cuisine Systeme models (the model number is on the metal plate on the bottom of the appliance):

• Cuisine Systeme 4200XL Red – 18403
• Cuisine Systeme 4200XL Red – 18432
• Cuisine Systeme 4200XL Red – 18474
• Cuisine Systeme 4200 – Red Models 4200 and 4150

⚠️ This handle is not compatible with the 3200XL and 5200XL models. To check exact compatibility for your model, click the “Check Model Compatibility” button at the top of the page.

🔧 Installation instructions

Replacing the 105591S handle requires only a small screwdriver. Estimated time: approximately 5 minutes.

⚠️ Turn off the food processor and unplug it before replacing.

1. Place the bowl on a stable surface with the handle facing up.
2. Locate the small hole at the top of the old handle.
3. Insert a small screwdriver into the hole and press upwards gently.
4. The handle will drop out of the connection channel in the bowl.
5. Align the new handle with the connection channel and press gently until it clicks into place.
6. Check that the handle is stable before using the bowl.

⚠️ This operation is intended for a person with skilled hands. Too much pressure on the screwdriver may cause damage to the connection channel in the bowl.

💡 Tip from the experts

Wash the handle separately from the bowl, as water that penetrates the handle's connection channel may cause the lock to loosen over time.
Additionally, check the base of the handle every few months for initial cracks. Early treatment prevents sudden breakage during use.

❓ Frequently Asked Questions

What do you do when the handle of a Magimix food processor bowl breaks?

When the bowl handle breaks, there is no need to replace the entire bowl.
Handle 105591S fits models 4150, 4200 and 4200XL and attaches to the original bowl channel without modification.
The replacement requires only a small screwdriver and about 5 minutes.

Does the 105591S handle fit the regular 4200 model (not XL)?

Yes. Handle 105591S fits models 4200 and 4150 in addition to 4200XL.
It is important to verify that these are models with a red bowl, due to the unique color of the handle.
The exact model number appears on the metal plate on the bottom of the device.

Do I need special tools to replace a Magimix handle?

No. The replacement only requires a small screwdriver, which is found in every home.
Insert the screwdriver into the hole at the top of the handle, press upwards, and the handle drops out.
The new handle is pressed back into the connection channel and locks with a click.

Does the 105591S handle fit the 3200XL or 5200XL models?

No. Handle 105591S is for the 4200XL, 4200 and 4150 series only. For the 3200XL and 5200XL models, there are dedicated handles with different connection sections.
Using an unsuitable handle may cause an unstable connection and a risk when lifting the bowl.

When should you replace the bowl handle and not wait until it breaks completely?

It is recommended to replace the handle as soon as an initial crack appears at its base. A small crack will expand over time due to the weight of the bowl during use.
Waiting until it breaks completely could cause the bowl to fall when full and damage the work surface.

⏱️ Delivery times:

• Most localities: within 10 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 10 business days