Description

Original Magimix motor shaft for food processor CS-5200 | 101350S

⚠️ Just before ordering – safety above all!
To ensure a successful repair and prevent repeated damage, it is essential to use only genuine parts.
A non-original axle may not fit the blades and cause damage to the engine.
Click on the button “Model Compatibility Check” At the top of the page for immediate approval.

The knife does not rotate even though the motor is running? Is the knife stuck on the spindle?
The original Magimix 101350S motor shaft is the direct solution to the worn shaft problem.
One of the most common faults in CS-5200 models after years of use.
The new axis comes with Reinforced drive wheel and improved latches, and supplied with enclosed assembly instructions.

💎 Why switch to an original Magimix spindle?

• ✅ Reinforced drive wheel – Improved design that lasts for many years
• ✅ 12 cm high – Exact dimensions for CS-5200 models
• ✅ Prevents repeated damage – Original hinge ensures longevity of knives
• ✅ Assembly instructions included. – Maximum convenience for self-replacement
• ✅ Original part only – No unauthorized substitution of any kind

⚠️ Please note – knife compatibility

This hinge is suitable for the gray knives only:

• ✅ Gray main knife 17042
• ✅ Gray pastry knife 17093

❌ If your knives are white – do not use this hinge. You must order the complete hinge kit 17710 which also includes new gray knives.

🔧 How do you replace the axle?

Self-replacement is simple:

1. (I.e. Turn off the food processor. And unplugged
2. 🔓 Remove the old hinge. Using a flat screwdriver – insert it under the base of the hinge and gently lift it up.
3. ✅ Assemble the new axle into the body of the food processor until it clicks
4. (I.e. Put down the knife. on the axis and check for stability
5. 🧪 Activate for testing Without food before first use

💡 Tip from the experts:
Before mounting the knives on the new axle – check that there is a Two flat wigs.
A worn knife on a new spindle will wear it out quickly and cause repeated malfunctions.

📋 Technical specifications

✅ Compatible models

💡 Not sure if your model is listed?
Click on the button “Model Compatibility Check” At the top of the page. The model sticker is located At the bottom of the food processor body.

💬 Frequently Asked Questions (FAQ)

Q: Is the 101350S spindle suitable for my food processor?

A: Click on the button “Model Compatibility Check” At the top of the page for immediate approval.
Please note: This axis is suitable For gray knives only (17042/17093). If the knives are white – order kit 17710.

Q: Is this a genuine Magimix part?

A: Absolutely. We are the official Magimix service provider in Israel and sell only original parts.

Q: Do I need to replace the knives along with the spindle?

A: If the gray knives (17042/17093) are in good condition – only the shaft can be replaced.
Yet, If the knives are worn out – It is recommended to replace them as well, as a worn knife on a new spindle will quickly wear it out again.

Q: My knives are white – will this hinge fit?

A: No. White knives require the Complete axle kit 17710 Including new gray spindle and knives.
Order the complete kit for a perfect solution – click to order HERE 

Q: How long will it take for me to receive the order?

A: Deliveries arrive within Up to 10 business days.
For the Golan Heights, the Arava, Eilat and settlements beyond the Green Line – within Up to 10 business days.

Customers who purchased this part noted favorably that the knife turned smoothly again after the replacement – ​​the food processor was back in full operation within minutes.