Description

Original inverter card for Bloomberg bottom freezer refrigerator | SKU 5993168100

Original Blomberg inverter card for KND series bottom freezer refrigerators.
A critical electronic component that controls the refrigerator compressor and ensures efficient and energy-efficient cooling.
Fits models KND3956, KND3958, KND3965 and KND3968.

⚠️ Important! This product requires installation by a qualified technician.

The inverter card is a complex electronic component that requires professional installation.
In our experience at official service laboratories, incorrect replacement may cause damage to the refrigerator or an electrical hazard.
We strongly recommend installation by a certified official service technician only.

📞 To schedule a certified official service technician, click here

Cost of a technician visit: 290 NIS

🔔 Just before ordering – safety above all!

To ensure a successful repair and maintain the lifespan of the refrigerator, it is essential to use only genuine parts.
Non-original parts may cause serious damage to the electronic system and compromise safety of use.
Now click the 'Check Model Compatibility' button at the top of the page. And our system will immediately confirm that the part fits your refrigerator model.

What is an inverter card and why is it important?

🧠 The electronic brain of the refrigerator

The inverter card is The central component that controls the refrigerator compressor.
Unlike regular refrigerators where the compressor operates at a constant speed,
Inverter technology allows the compressor to work at variable speeds depending on the need for cooling.

Our certified technicians state that a properly functioning inverter card ensures:

• 🔹 Significant electricity savings – The compressor does not work at full capacity all the time
• 🔹 Quieter operation – No frequent on and off
• 🔹 Maintaining a stable temperature – Uniform and precise cooling
• 🔹 Extending compressor life – Less wear and tear from repeated operations

Signs of a malfunction in the inverter card

🔧 When should the card be replaced?

From our experience in the service laboratories , the following signs indicate a possible fault in the inverter card:

• ⚠️ The refrigerator is not cooling. – The compressor does not start at all.
• ⚠️ Error codes on the display – Appearance of codes such as E1, E6, E7, E9, E13 or a red exclamation mark
• ⚠️ Unusual noises – The compressor tries to work but fails.
• ⚠️ Irregular behavior – The refrigerator freezes excessively or does not cool enough.
• ⚠️ Display is flashing – Unstable display with changing numbers
• ⚠️ The refrigerator is “dead” – No light, no noise, display off

pay attention: A fault code does not always indicate a problem with the card itself.
Only a qualified official service technician Can accurately diagnose the source of the fault.

📞 To schedule a diagnosis and treatment by a certified technician

Why is it important to use an original inverter card?

🛡️ Original card benefits

A non-original inverter card may cause irreversible damage to the refrigerator.
Blomberg's original electronic components are manufactured to strict standards and precisely matched to the refrigerator systems.

• 🔹 perfect match – Proper communication with all refrigerator components
• 🔹 Long-term reliability – High-quality components that withstand prolonged working conditions
• 🔹 Electrical safety – Built-in protection against voltage surges and short circuits
• 🔹 Updated software – Original Software Version (V 10.0.2.0)

This is one of the most sought-after spare parts for Blomberg refrigerators due to its reliability and critical impact on the functioning of the refrigerator.

How to find the model number of the refrigerator?

📍 Location of the model sticker on the Blomberg refrigerator

Before ordering, it is important to make sure that the part fits your refrigerator model.
The model sticker on Blomberg refrigerators is usually located on the inside wall of the refrigerator., at the top or side.
Open the refrigerator door and look for a label with the model number that begins with the letters KND.

💡 Tip: Click the 'Check Model Compatibility' button at the top of the page and enter the model number - the system will immediately confirm compatibility.

⚡ Professional installation only – don’t put yourself at risk!

Why is a certified technician required to install an inverter card?

The inverter card is connected to high voltage and sensitive electronic systems.
Unprofessional installation may cause:

• ❌ Risk of electric shock
• ❌ Irreversible damage to the compressor
• ❌ Short circuit and fire
• ❌ Damage to other components in the refrigerator

We strongly recommend Only use the services of a qualified official service technician.
The technician will perform a professional diagnosis, verify that the card is indeed the source of the problem, and install the part safely and correctly.

📞 Click here to schedule a certified official service technician

Cost of a technician visit: 290 NIS

💡 Expert tip – Preventing inverter card failures

To extend the life of the card and prevent malfunctions:

• Plug the refrigerator into a properly grounded outlet.
• Consider installing a voltage stabilizer or uninterruptible power supply to protect against power surges.
• Avoid frequently unplugging and plugging the refrigerator into the power outlet.
• Ensure proper ventilation behind the refrigerator to prevent overheating.

Technical

Frequently Asked Questions (FAQ)

❓ Is the card suitable for my refrigerator model?

Click on 'Check Model Compatibility' button at the top of the page and enter the model number of the refrigerator.
The system will immediately confirm if the part is suitable.

❓ Is this an original Blomberg part?

Yes, absolutely. This is an original Blomberg spare part, manufactured by Arçelik and imported by the official importer.
We provide Only original parts To maintain the safety and integrity of the refrigerator.

❓ Can I replace the card myself?

We strongly recommend not to. The inverter card is a complex component connected to high voltage.
Independent installation may endanger you and cause damage to the refrigerator.
Contact a qualified official service technician. To carry out the replacement safely and professionally.

📞 To schedule a certified technician, click here

❓ How much does it cost to install the card?

The cost of a visit by a certified official service technician is 290 NIS.
The technician will perform a professional diagnosis and install the card safely.

❓ How do I know if the problem is with the inverter card?

Different error codes can indicate different problems with the refrigerator.
Only a qualified technician Can accurately diagnose if the card is the source of the problem. Do not replace parts without professional diagnosis.