Description

Original freezer door seal for Amana refrigerator | 482000006532

Is ice accumulating in the freezer compartment? Is the freezer door not closing tightly?
That's exactly why you're here. A damaged door seal is one of the most common causes of refrigeration failures.
When the gasket is worn, torn, or too flexible, hot air penetrates inside and damages the integrity of the refrigerator.
Click the “Check Model Compatibility” button at the top of the page before ordering.

What happens when the gasket breaks?

The freezer door seal plays one critical role:
Maintain complete sealing between the freezer compartment and the outside air.
When it wears out, hardens, or cracks, the hot air from outside continuously penetrates inside.

Signs that will tell you it's time for a replacement:

✅ Ice accumulates on the inside wall of the freezer compartment
✅ The door does not close hermetically in the usual way
✅ The refrigerator runs more frequently than usual
✅ You can easily pull a sheet of paper from between the door and the refrigerator body.

When the door does not seal properly, the compressor has to work harder to maintain the temperature.
Because the compressor works continuously, electricity consumption increases, and the quality of storage in the freezer compartment is compromised.

Why only an original part?

✅ Exact fit for model GB5525PEKW
Each seal is manufactured to the specific door dimensions of the model.
A gasket that does not fit exactly will not create a complete seal.

✅ Flexibility and long-term durability
The original rubber is manufactured and certified by Amana to withstand extreme temperature changes – from deep freeze to ambient temperature,
Hundreds of thousands of times.

✅ Built-in magnet – The original seal includes a magnetic strip that ensures active contact and sealing at any point along the perimeter.
An unapproved replacement may not have the required magnet strength.

⚠️ Using a non-original part may damage the device and cause additional malfunctions in the temperature memory.

📍 How do you find the model number of your refrigerator?

You will find the refrigerator's model number on the left wall of the refrigerator compartment (not the freezer) - usually on a sticker on the inside.
The model number is essential to verify part compatibility before ordering.

Technical

FAQ

How do you check if the refrigerator gasket is still working properly?

The simplest way is the “paper test”:
Close the door on a piece of paper at various points along the perimeter. If the paper pulls easily, the seal is not creating enough pressure.
Also, ice accumulating on the interior walls often indicates the infiltration of warm air through a damaged seal.

Why does ice accumulate on the door and inside the freezer compartment?

When the gasket does not seal properly, warm, humid air from outside penetrates the freezer compartment.
The moisture in the air immediately freezes on the cold walls.
Therefore, this is a clear sign of a worn seal that requires replacement.

How do you replace a refrigerator door seal?

You can do the replacement yourself without special tools.
Open the door, pull the old gasket out of the channel along the entire perimeter, and then insert the new gasket.
It is recommended to soften the new gasket with hot water or a hair dryer before installation.

What causes the freezer door to not close tightly?

Three main factors:
(1) Worn, hardened or torn gasket;
(2) Ice buildup preventing the door from closing;
(3) The door is not aligned properly on the hinges. In many cases, replacing the gasket takes less than 15 minutes and completely solves the problem.

Is replacing a refrigerator gasket a repair that can be done at home?

Yes. Replacing a door seal is considered one of the most accessible repairs that can be done at home.
No special tools are required and there is no danger. It is important to make sure that you order the exact gasket for your refrigerator model before purchasing.

⏱️ Delivery times:

• Most localities: within 10 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 10 business days