Description

Original drain pump for Beko Blomberg Grundig dishwasher | SKU 1762650700

Quality drain pump – efficient and proper dishwasher

The genuine Beko, Blomberg and Grundig drain pump provides a reliable and accurate solution to get your dishwasher back to optimal performance. Installing the part requires technical knowledge, so we recommend installation by a qualified Beko technician. Marom Service (visit cost: 290 NIS). A professional technician will ensure proper installation that will prevent future damage and ensure proper operation over time.

Why choose an original dishwasher drain pump?

• Efficient drainage: The original drain pump ensures complete evacuation of dirty water at exactly the required rate, preventing the accumulation of stagnant water and unpleasant odors.
• Energy saving: An original pump operates with higher energy efficiency than imitations, which reduces electricity consumption and lowers your monthly electricity bill.
• Quiet operation: Precise engineering design ensures a significantly lower noise level compared to alternative pumps, for a pleasant use experience in the kitchen.
• perfect match: The pump is designed to precisely match the compatible dishwasher models, ensuring correct installation and perfect connection to the dishwasher systems.
• Long-term reliability: The quality of the materials and the meticulous manufacturing processes ensure high durability and reliable operation over the years, without the need for repeated replacements.

Time and again, we see customers tempted to purchase non-genuine parts because of their low price, only to find that they have to replace them again within a few months. While the original pump may be more expensive at the initial purchase, the investment pays off in the long run due to its reliability and longevity.

To coordinate installation with a certified technician Marom Service Click here

Warning signs for replacing the drain pump

When should the drain pump in a dishwasher be replaced?

• The dishwasher does not drain the water at the end of the washing program.
• Water stands at the bottom of the dishwasher after the program ends
• Unusual humming or rattling noises during the drain phase
• An error code relating to a drainage problem appears on the dishwasher display
• Wash cycles take longer than usual
• Water leaks from the bottom of the dishwasher while it is operating.

Continuing to use a dishwasher with a faulty drain pump may cause leaks, water damage, mold, and significant damage to other systems in the dishwasher, leading to a much more expensive repair later. For a professional and accurate diagnosis, it is recommended Coordinate a qualified technician Marom Service.

Technical

• SKU: 1762650700
• Suitable for dishwasher models: BDFN36522, DIN48520, GNTP4630, GNVP2450, GNVP4542, GNVP4551, GNVP4630, GVN409P8
• Working voltage: 220-240V, 50Hz
• supply: 30-40W (depending on dishwasher model)
• Drainage capacity: Up to 15 liters per minute

Professional installation

Important: Installing a drain pump requires technical knowledge and access to the dishwasher's internal components.
We strongly recommend installation by a qualified technician. Marom Service (Cost of visit: 290 NIS) for the following reasons:

• Precise installation: Marom technicians are familiar with all dishwasher models and will perform a precise and quick installation.
• Preventing malfunctions: Professional installation prevents future problems resulting from improper installation
• Damage prevention: Improper installation may cause water damage and leaks.
• Testing additional systems: The technician can check additional systems in the dishwasher and make sure there are no additional problems.
• saving time: Professional installation will save you valuable time of trial and error.

To coordinate a technician for Marom Service Click here

If you still decide to install it yourself, here are basic instructions (recommended only for those who have experience in maintaining electrical appliances):

1. Disconnect the dishwasher from the electricity and water supply before starting work.
2. Remove the bottom panel of the dishwasher to access the drain pump.
3. Disconnect the water pipes and electrical connections to the pump (take a picture before disconnecting to make installation easier)
4. Loosen the fixing mechanism and remove the old pump.
5. Install the new pump and make sure it is seated correctly.
6. Connect the water pipes and electrical wiring as they were.
7. Check for leaks and that all connections are secure.

Pro tip: Clean the pump filter and pump area of ​​dirt and buildup before installing the new pump to ensure efficient operation.

FAQ

How do I know for sure that the problem is with the drain pump and not another part of the dishwasher?

Most signs of a drain pump failure are similar to other dishwasher problems.
The best way is to have a professional diagnosis done by a technician. Marom Service.
However, if the dishwasher does not drain water, leaves water in the bottom at the end of the program, or makes unusual humming noises during the drain phase,
There is a high probability that the problem lies in the drain pump. Coordinate with a technician for an accurate diagnosis.

What are the benefits of hiring a technician? Marom Service?

technician Marom Service specializes specifically in Beko, Bloomberg and Grundig products, and has undergone dedicated training on behalf of the importer.
The benefits include: access to original spare parts, dedicated professional equipment, in-depth knowledge of all dishwasher models, and up-to-date technical knowledge for accurate diagnosis and effective solution of the problem.
Cost of technician visit Marom Service (290 NIS) includes a comprehensive diagnosis and professional installation, ensuring optimal results and preventing future malfunctions.

Is an original drain pump more expensive than a replacement pump, and why?

Yes, an original drain pump is usually more expensive than a replacement pump.
The price difference is due to the quality of the materials, engineering precision, and compliance with the original manufacturer's strict standards.
The additional investment pays off in the long run: the original pump operates more efficiently, prevents leaks and water damage, and significantly extends the life of the dishwasher. When calculating the cost over time, the original pump is usually the more economical option.

How long does it take for a technician to install a drain pump? Marom Service?

Professional installation by a technician Marom Service takes only 30-45 minutes, compared to 2-3 hours that may be required for someone who is not familiar with the dishwasher.
This is because the technicians know the exact structure of each model, come with appropriate tools, and have undergone specialized training.
At the end of the installation, the technician will perform a complete inspection of the dishwasher. To schedule a quick and professional installation, click here..

How long should an original drain pump last?

A high-quality, original drain pump, in normal household use, should last between 5-8 years.
The lifespan is affected by the frequency of use, water hardness, cleanliness of the filters, and dishwasher usage habits.
Proper maintenance, including regular cleaning of dishwasher filters and ensuring proper use, can significantly extend the life of the pump.

Upgrade your dishwasher now

Restore your dishwasher to optimal operation with a genuine Beko, Bloomberg or Grundig drain pump.
Investing in an original product combined with professional installation will ensure the reliability of the dishwasher, prevent water damage, and give you peace of mind for years to come.

For professional, high-quality installation, we recommend Coordinate a qualified technician Marom Service (Cost of visit: 290 NIS).

Installation by a qualified technician ensures:

• Precise and fast installation
• Professional and precise execution
• Checking additional systems in the dishwasher
• Prevention of future damages

Order now and receive an original drain pump from the official importer!

Our team of experts is available for any questions or consultation regarding choosing the right parts for your dishwasher.