KitchenAid mixer accessories: meat grinder, dough hook, pasta and ice cream
Updated: July 2026
In short: The KitchenAid mixer is much more than a mixer. With the right accessories, it becomes a meat grinder, pasta maker, homemade ice cream maker and food processor - all from the same power outlet. The original accessories for the KSM150 and KSM7580 models connect in seconds without tools. Marom, the official KitchenAid service provider in Israel, holds inventory with fast home delivery.
Which original accessories are suitable for the KitchenAid mixer?
KitchenAid mixers come with three basic attachments: a dough hook for heavy doughs, a dough hook for cakes and cookies, and a wire whisk for cream and egg whites. All three connect to the same socket on the mixer body and are replaced with a single click. In addition, there is a wide range of attachments that are purchased separately and connect to the front power socket of the mixer.
As a result, those who purchased one mixer essentially received a complete kitchen appliance. Each accessory adds a completely new capability. Therefore, before purchasing a separate device, it is worth checking whether the original accessory does not provide the same result.
The Original Meat Grinder comes in two models. The 5KSMFGA is lightweight and affordable, and is suitable for occasional use with meat, fish and tough vegetables. The 5KSMMGA has a full metal body, is more durable for frequent grinding, and comes with three grinding discs and a built-in sausage attachment. Both models connect to the same power outlet on all mixer models.
| accessory | For what use? | compatibility |
|---|---|---|
| Meat grinder 5KSMMGA (metal) | Meat, fish, hard vegetables - frequent use | KSM90, KSM150, KSM175, KSM125, KSM7580, KSM7591, KSM7581 |
| Meat grinder 5KSMFGA (plastic) | Meat, fish, vegetables, dry bread - occasional use | All models |
| KSM150 kneading hook | Bread dough, challah, pizza | KSM150, KSM125, KSM175 |
| Pasta accessory 5KPEXTA | Cutting pasta into 6 different shapes | All models |
| KICA ice cream accessory | Ice cream, sorbet, frozen yogurt | KSM150, KSM7580 |
| Guitar hook with silicone tip 5KFE5T | Cakes, cookies, medium-sized masses | KSM150, KSM90 |
According to KitchenAid's manufacturer's instructions, all mixer accessories are designed for the same standard power outlet on the mixer head. The connection mechanism is the same on all models from KSM90 to KSM7580, ensuring full compatibility of the accessories for years to come.Source: Official KitchenAid Accessory Guide, Instructions for Use and Compatibility
KitchenAid Meat Grinder: How to Use It Correctly
Before each grinding, chill the meat in the freezer for about 30 minutes. Semi-frozen meat is ground cleanly and not spread. Cut into 2 to 3 cm cubes, and remove bones and tendons before feeding. Feed the meat using the food pusher only, never with your fingers.
After each use, disassemble the screw, blade, and washer, and hand wash with warm water and mild soap. Drying thoroughly before storage prevents rust, which is the most common cause of damage to metal parts.
Three signs indicate that it's time to replace it: the meat comes out smeared and uncut despite cleaning, there is an unusual noise while grinding, or the body is cracked and rusty. Before determining that the accessory is "gone" - first check the sharpness of the knife, because a dull knife is the most common cause of grinding that looks like smearing.
What is the difference between KSM150 and KSM7580 and what accessories are suitable for each?
The KSM150 is the classic mixer with a lifting head - the bowl sits on the base and does not move. The KSM7580 is the large model with a bowl lifting mechanism - the head is fixed and the bowl rises towards the attachment. The practical difference is in the volume: the KSM150 works with a 4.8-liter bowl and is suitable for home baking, while the KSM7580 comes with a 6.9-liter bowl and is suitable for baking in large quantities.
Therefore, some accessories are designed for a specific bowl size. The dough hook of the KSM150, for example, will not work properly in the KSM7580. However, all accessories that connect to the front power socket are compatible with all models. Additionally, specific bowls and lids depend on the model and compatibility should be checked before ordering.
No. The KSM150 hooks are designed for bowls up to 4.8 liters with a lifting head and are not compatible with the KSM7580 which uses a bowl lifting mechanism. Always check compatibility by model number on the Merom website before ordering.
When do you need to replace spare parts on a KitchenAid mixer?
A KitchenAid mixer is built to last. However, three parts wear out over time. First, the accessories themselves—a dough hook with a peeling enamel coating, a whisk with a broken wire, a guitar hook with a damaged silicone tip, or a meat grinder with a dull blade. Second, the rubber bowl that keeps it from lifting up during heavy mixing. Third, the clutch mechanism that protects the motor from overloading.
The first sign that something is wrong is a strong vibration from the mixer during normal kneading. The second sign is a dough hook that does not reach the bottom of the bowl and leaves dough on the sides. Both of these signs can be solved by simply adjusting the height, not by replacing it.
From the experience of a Marom technician, the most common reason for contacting KitchenAid mixers is a dough hook that does not reach the bottom of the bowl. In most cases, this involves a simple height adjustment using the adjustment screw at the bottom of the mixer head, and not replacing the accessory at all.Source: Team Marom Service, the official KitchenAid service provider in Israel
How to adjust the height of the accessory
There is an adjustment screw at the bottom of the mixer head. Turn it a quarter turn clockwise to lower the attachment a little further into the bowl. The correct height: The attachment goes just above the bottom of the bowl. Also, if the enamel coating on the dough hook starts to peel, stop using it immediately - chips of the coating can get into the food.
If the enamel coating on the dough hook is peeling, replace it immediately. Chips of worn coating may get into the food. Use only an original KitchenAid dough hook - a replacement accessory may warp during prolonged kneading and damage the motor. The same rule applies to the meat grinder knife: a non-original knife may warp and damage the motor.
Genuine KitchenAid replacement parts are made from food-grade materials and are precisely matched to each model. A replacement accessory may warp with prolonged kneading and damage the motor.
How do you check that an accessory is suitable for your model?
The model number is on a sticker on the bottom of the mixer - it usually starts with KSM followed by four digits. Once you have identified the model, check compatibility on the Merom website before ordering.
A simple rule to remember: All accessories that plug into the front power outlet on the mixer head fit all models. However, dedicated bowls and anchors depend on the specific model. Additionally, it is important to distinguish between lift-head models (KSM150 and family) and riser-bowl models (KSM7580 and above) - they do not share accessories.
According to KitchenAid's instructions, it is recommended to wash all mixer accessories in hot water with mild soap after each use. Most accessories are dishwasher safe in the top rack only. The stainless steel bowl is also dishwasher safe in the bottom rack.Source: KitchenAid Maintenance Guide, Cleaning and Storage Instructions
Yes. Additional bowls for the KSM150 models - including a 4.8 liter glass bowl (K5GB) and a stainless steel bowl K5THSBP - are available for separate purchase on the Merom website. A second bowl is useful when preparing several mixtures in one cooking.
Maintenance that extends the life of your KitchenAid mixer
A KitchenAid mixer can last for decades with proper basic maintenance. Cleaning after each use is the most important habit. Then, store the accessories dry and separated so they don't get clogged.
- After each use: Wipe the mixer body with a damp cloth. Do not pour water directly onto the base or power outlet.
- Accessories: Most accessories are dishwasher safe in the top rack only. Check the instructions for each accessory before inserting.
- Height adjustment: Check once a month that the accessory still reaches the bottom of the bowl and is functioning properly.
- Don't overload: Do not grind frozen meat or knead hard dough continuously. Let the motor rest every 3-4 minutes of continuous work.
- Check the coating: A dough hook with a coating that is starting to peel off - replace immediately, do not continue to use.
- The meat grinder: Dry each part thoroughly after washing, including the small openings in the disc. Residual moisture is the most common cause of rust.
Related articles
- KitchenAid Mixer Accessories and Spare Parts - Marom
- Magimix Food Processor - Genuine Service and Accessories
- Tips and Information - Maintenance Guides for Kitchen & Home Appliances
FAQ
Original dough hook for KitchenAid KSM150 mixer, 5 liter bowl, broke after 3 years - replace it yourself or send it in for repair?
Replacing the dough hook for a KitchenAid KSM150 mixer is a completely simple operation. Remove the old hook by turning it counterclockwise and attach the new one. It is important to make sure that the hook fits the specific model - KSM150 and KSM175 are usually the same in bowl size, but not always. On the Merom website you will find compatibility by model number before ordering.
KitchenAid KSM7580 mixer hums and does not rotate when connecting a 5KSMFGA meat grinder - motor malfunction or accessory problem?
The most common cause is overloading. Cut the meat into small pieces of 2 to 3 centimeters and try again. If the problem recurs even with a small amount, the clutch mechanism that protects the motor may be worn out. In such a situation, call a Marom technician for an inspection.
What is the difference between the metal meat grinder 5KSMMGA and the plastic model 5KSMFGA?
The metal 5KSMMGA model is more durable for frequent use and includes three different sized grinding discs and a built-in sausage attachment. The 5KSMFGA model is lighter and more affordable, and is suitable for occasional use with meat, fish, and tough vegetables.
Where can I buy the KICA ice cream accessory for the KitchenAid KSM150 mixer in Israel and what is the delivery time?
The KICA ice cream attachment for the KitchenAid KSM150 mixer is available for purchase through the Marom website . Home delivery costs NIS 40, and is free on orders over NIS 300. You can also pick up from the Holon branch (Hatzoraf 3, Sun-Thu 9:00-15:00). Before using, place the attachment bowl in the freezer for at least 15 hours.
Looking for an original accessory for your KitchenAid mixer?
Marom with a current stock of all original accessories and fast shipping throughout the country
Sources
- Marom Services - Original accessories and spare parts for KitchenAid mixer
- Official KitchenAid Accessory Guide - Instructions for Use and Model Compatibility
- KitchenAid Maintenance Guide - Cleaning and Storage Instructions
- Magimix - Service and Accessories - marom-serv.co.il
